Radiation-induced graft polymerization of acrylic acid onto fluorinated polymers. I. Kinetic study on the grafting onto poly(tetrafluoroethylene-ethylene) copolymer

Direct radiation-induced grafting of aqueous acrylic acid (AAc) onto poly(tetrafluoroethylene-ethylene) (ET) film has been studied. The effect of grafting conditions such as monomer concentration, exposure dose, dose rate, and film thickness on the grafting yield was investigated. The dependence of the grafting rate on monomer concentration was found to be 1.2 order. The dependence of the grafting rate on dose rate was found to be 0.6 order regardless of the film thickness. The relationship between the grafting rate and film thickness gave a negative first-order dependence. The results suggest that the grafting process is mainly controlled by monomer diffusion, and it was concluded that this grafting system proceeded by the front mechanism. The swelling behavior increases linearly with degree of grafting. The electrical conductivity and mechanical properties for the trunk and grafted polymer were investigated at different irradiation doses in air and under vacuum irradiations. © 1992 John Wiley & Sons, Inc.     

Reductive Elimination of Phenylsulfonyl Groups in the 3‐Position of Benzo[a]heptalene‐2,4‐diols

3‐(Phenylsulfonyl)benzo[a]heptalene‐2,4‐diols 1 can be desulfonylated with an excess of LiAlH₄/MeLi?LiBr in boiling THF in good yields (Scheme 6). When the reaction is run with LiAlH₄/MeLi, mainly the 3,3′‐disulfides 6 of the corresponding 2,4‐dihydroxybenzo[a]heptalene‐3‐thiols are formed after workup (Scheme 7). However, the best yields of desulfonylated products are obtained when the 2,4‐dimethoxy‐substituted benzo[a]heptalenes 2 are reduced with an excess of LiAlH₄/TiCl₄ at ?78→20° in THF (Scheme 10). Attempts to substitute the PhSO₂ group of 2 with freshly prepared MeONa in boiling THF led to a highly selective ether cleavage of the 4‐MeO group, rather than to desulfonylation (Scheme 13).     

The acidity constants of some pyrimidine bases in various water-organic solvent media

The acid ionization constants of some pyrimidine bases of nucleic acids were determined pH-metrically at 25 degrees C and at the constant ionic strength I = 0.10 mol l(-1) (KNO3) in pure water as well as in aqueous media containing variable mole percentages (5-30%) of organic solvents. The organic solvents used were methanol, ethanol, N,N-dimethylformamide (DMF), dimethylsulfoxide (DMSO), acetonitrile, acetone and dioxane. The results obtained indicated that the acidity constants are generally decreased as the content of an organic solvent in the medium is increased. It was deduced that the hydrogen bonding interactions and the solvent basicity in addition to the electrostatic effect are the major effects influencing significantly the acid ionization process of pyrimidine bases in the different water-organic solvent media. Some thermodynamic parameters (deltaH, deltaG degrees, deltaS degrees) of the ionization process over the temperature range 5-45 degrees C in pure water were also determined and discussed.     

Structural studies on cadmium(II), cobalt(II), copper(II), nickel(II) and zinc(II) complexes of 1-malonyl-bis(4-phenylthiosemicarbazide)

Summary Several new complexes of the title ligand (H₂MPTS) with Co^II, Ni^II, Cu^II, and Cd^II have been prepared. Structural assignments of the complexes have been made based on elemental analysis, molar conductivity, magnetic moment and spectral (i.r.,¹H n.m.r., reflectance) studies. The compounds are non-conductors in dimethylsulphoxide. The neutral molecule is coordinated to the metal(II) sulphate as a bidentate ligandvia the two carbonyl groups. The ligand reacts with the metal(II) chlorides with the liberation of two hydrogen ions, behaving as a bianionic quadridentate (NONO) donor. Enolization is confirmed by the pH-titration of H₂ MPTS and its metal(II) complexes against NaOH. A distorted octahedral structure is proposed for the Cu^II complex, while a square planar structure is suggested for both Co^II and Ni^II complexes. The stoichiometry of the complexes formed in EtOH and buffer solutions, their apparent formation constants and the ranges for obedience to Beer's law are reported for Co^II, Ni^II and Cu^II ions. The ligand pK values are calculated. The antimicrobial activity of H₂ MPTS and its Co^II, Ni^II, Cu^II and Mn^II complexes is demonstrated.     

Coordination compounds of hydrazine derivatives with transition metals,part XVIII. Cobalt(II) and cobalt(III) chelates with schiff bases derived from hydrazine-S-methyldithiocarboxylate and thiosemicarbazide

Summary The reactions of aldehydic and ketonic Schiff bases derived from hydrazine-S-methyl dithiocarboxylate and thiosemicar-bazide with cobalt(II) acetate were investigated. Octahedral tris ligand cobalt(III) chelates were formed with aldehydic Schiff bases whereas tetrahedral bis ligand cobalt (II) chelates were isolated with ketonic Schiff bases.N-isopropylidene hydrazine-S-methyldithiocarboxylate, however, gave both octahedral tris cobalt(III) and tetrahedral bis cobalt(II) chelates. These results are interpreted in terms of the steric requirements of the Schiff base used.     

Synergic effect of triphenylphosphine oxide (TPPO) on the extraction of Hg(II), Se(IV), Co(II) and Mn(II) with fluorinated pyrazolone (HPMTFP)

Extraction of Hg(II), Se(IV), Mn(II) and Co(II) has been carried out with 1-phenyl-3-methyl-4-trifluoroacetyl-2-pyrazolin-5-one (HPMTFP) and triphenylphosphine oxide (TPPO) into chloroform from pH 1–10. Quantitative extraction of Hg(II), Mn(II) and Co(II) at pH 4 with equimolar 0.05M (PMTFP+TPPO) in chloroform was observed. Se(IV) remains unextracted at this pH range. The stoichiometric composition of the extracted complexes M(PMTFP)₂·nH₂O (M=Mn, Hg), M(PMTFP)₂·2TPPO (M=Mn and Co) and Co(PMTFP)₂·TPPO·H₂O at less than 0.1M TPPO has been established. The formation constantsK _m,0 andK _m,n and stability constants _m,n have been computed. The analytical method developed was applied to the IAEA standard reference material (SRM) potato fluor V-4 for the determination of these elements using NAA technique.     

Ruthenium(II) and ruthenium(III) complexes derived from O,O-donor ligands

The new [Ru¹¹(PPh₃)₂L₂] complexes [L=monoanion of tropolone, benzoylacetone, or 3-hydroxy-2-pyridinone (hypy)], [RuH(PPh₃)₃L′][HL′=maltol, dibenzoylmethane or 1,2-dimethyl-3-hydroxy-4-pyridinone (Hdmhypy)] and [Ru^IIIX₂(EPh₃)₂L″] complexes (X=Cl, Br; E=As or P; L″=hypy, dmhypy) have been prepared, and characterized by spectroscopic techniques. Their redox behaviour was studied by cyclic voltammetry. Most of the complexes were found to be effective catalysts for the oxidation ofp-methoxybenzyl alcohol to the corresponding aldehyde in the presence ofN-methylmorpholine-N-oxide as co-oxidant.     

Fused quinoline heterocycles VI: Synthesis of 5H‐1‐thia‐3,5,6‐triazaaceanthrylenes and 5H‐1‐thia‐3,4,5,6‐tetraazaaceanthrylenes

Ethyl 3‐amino‐4‐chlorothieno[3,2‐c]quinoline‐2‐carboxylate ( 4 ) is a versatile synthon, prepared by reacting an equimolar amount of 2,4‐dichloroquinoline‐3‐carbonitrile ( 1 ) with ethyl mercaptoacetate ( 2 ). Ethyl 5‐alkyl‐5H‐1‐thia‐3,5,6‐triazaaceanfhrylene‐2‐carboxylates 9a‐c , novel perianellated tetracyclic heteroaro‐matics, were prepared by refluxing 4 with excess of primary amines 7a‐c to yield the corresponding amino‐thieno[3,2‐c]quinolines 8a‐c . Subsequent reaction with an excess of triethyl orthoformate (TEO) furnished 9a‐c . Reaction of 4 with TEO in Ac₂O at reflux, gave the simple acetylated compounds, thieno[3,2‐c]‐quinolines 12 and 13 . Refluxing 4 with benzylamine ( 7d ) gave 10 , and subsequent treatment with TEO gave the tetracyclic compound 11 . Refluxing 13 with an excess of alkylamines 7a‐d gave the fhieno[3,2‐c]quino‐lines 15 . Refluxing the aminothienoquinolines 8b with an excess of triethyl orthoacetate gave thieno[3,2‐c]quinoline 17 , while heating with Ac₂O gave 18 and 19 , with small amounts of 16 . Reaction of 8a,b with ethyl chloroformate and phenylisothiocyanate generated the new 1‐thia‐3,5,6‐triazaaceanthrylenes 20a,b and 21a,b , respectively. Diazotization of 8a‐c afforded the novel tetracyclic ethyl 5‐alkyl‐5H‐1‐fhia‐3,4,5,6‐tetraazaaceanthrylene‐2‐carboxylates 22a‐c in good yields.     

Kinetics and mechanism of oxidation of a ternary complex involving dipicolinatochromium(III) and DL‐aspartic acid by N‐bromosuccinimide

The kinetics of oxidation of [Cr^III(Dpc)(Asp)(H₂O)₂] (Dpc = dipicolinic acid and Asp = DL ‐aspartic acid) by N‐bromosuccinimide (NBS) in aqueous solution have been found to obey the equation: where k₂ is the rate constant for the electron transfer process, K₁ is the equilibrium constant for deprotonation of [Cr^III(Dpc)(Asp)(H₂O)₂], K₂ and K₃ are the pre‐equilibrium formation constants of precursor complexes [Cr^III(Dpc)(Asp)(H₂O)(NBS)] and [Cr^III(Dpc)(Asp)(H₂O)(OH)(NBS)]^?. Values of k₂ = 4.85 × 10^?2 s^?1, K₁ = 1.85 × 10^?7 mol dm^?3, and K₂ = 78.2 mol^?1 dm³ have been obtained at 30°C and I = 0.1 mol dm^?3. The experimental rate law is consistent with a mechanism in which the deprotonated [Cr^III(Dpc)(Asp)(H₂O)(OH)]^? is considered to be the most reactive species compared to its conjugate acid. It is assumed that electron transfer takes place via an inner‐sphere mechanism. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 36: 394–400, 2004     

Highly sensitive catalytic determination of molybdenum

A novel, highly sensitive, selective, and simple kinetic method was developed for the determination of Mo(VI) based on its catalytic effect on the oxidation of 1-amino-2-naphthol-4-sulfonic acid (ANSA) with H₂O₂. The reaction was followed spectrophotometrically by tracing the oxidized product at 465 nm after 30 min of mixing the reagents. The optimum reaction conditions were: 10 mmol l⁻¹ ANSA, 50 mmol l⁻¹ H₂O₂, 100 mmol l⁻¹ acetate buffer of pH 5.0 ± 0.05 and at 40 °C. Addition of 200 μg ml⁻¹ diethylenetriaminepentaacetic acid (DTPA) conferred high selectivity for the proposed method. Following the recommended procedure, Mo(VI) could be determined with a linear calibration graph up to 2.5 ng ml⁻¹ and a detection limit, based on the 3S_b-criterion, of 0.027 ng ml⁻¹. The unique sensitivity and selectivity of the implemented method allowed its direct application to the determination of Mo(VI) in natural and industrial waste water. The method was validated by comparison with the standard ETAAS method. Moreover, published catalytic-spectrophotometric methods for the determination of molybdenum were reviewed.